Description
Bison Lock Bond 10ml. Locking agent for metal bolts, nuts and screws.
Shock and vibration proof.
SUITABLE FOR:
Locks bolts, nuts, screws and tap bolts which should be able to be unscrewed later on. Seals screw threads and protects them from rusting.
NOT SUITABLE FOR:
Not suitable for applications with synthetics and wood.
BEFORE USE:
Working conditions
Do not use at temperatures below +10 °C
Preliminary surface treatment
Parts to be locked must be dry and free of dust and oil. Degrease, e.g. with acetone. Remove any loose rust beforehand with a wire brush or similar.
DURING USE:
Directions for use
Apply Metal Lock to screw thread and assemble. Metal Lock hereby also works as a lubricant. After assembly, do not move or shift parts.
Points of attention
Metal Lock is an anaerobic adhesive. This means that the product cures in combination with metal and in the absence of oxygen. Therefore, adhesive outside the joint will not cure, due to the presence of oxygen.
AFTER USE:
Stains/residue
Remove fresh stains immediately with acetone. Remove cured adhesive with a sharp knife.
Storage conditions
Store in a dry, cool and frost free place.
Reviews
There are no reviews yet.