Description

Easily remove any trace of residue with the Dilunett stripper and its water-based formula that allows you to have a better prepared surface for subsequent treatments. Quick and efficient, it strips previously applied coating (paints, varnishes, glues…) and rinses away effortlessly to leave you with a clean surface ready to repaint.

Ideal for your DIY jobs.

Properties
Strips paints, stains, varnishes… without sanding.
It also removes deep stains.
Makes the coating water soluble – remove with a simple rinse.
It does not evaporate, it does not dry out in hot weather.
It is reactivated by moistening.
No sanding.
Effective, up to 8 coats of paint in one application:
Destination
Effective on wood**, PVC, metal***…
Effective, up to 8 layers of paint stripped in a single application.
** Except oak, chestnut, red cedar and marquetry.
***Except aluminum.
Tips for correct application
Always do a preliminary test.
Use protective gloves, a nylon brush or a fiber brush.
The action time varies from a few minutes to several hours depending on the type of coating (glycerophthalic or acrylic) and the number of layers. Check its action using a spatula.
Regarding stripping on absorbent supports, neutralization with NET-TROL is always recommended.
Application
Apply a thick layer of DILUNETT over the entire surface to be stripped. Let the product work. In case of drying, reactivate with a fine spray of water. Rinse with clean water and a brush or HP cleaner (max. 60 bars). NOTE: Using hot water makes removal easier. After stripping wood, always apply NET-TROL (on damp wood) and IMMEDIATELY after rinsing off DILUNETT. Consult the application method on the packaging.